Kanguru USB3.0 PCIe Host Controller User Manual download pdf

Kanguru USB3.0 PCIe Card

Quick Start Guide

Legal terms and conditions available at www.kanguru.com

Please review and agree before use. Thank you.

1. Introduction

Congratulations on purchasing the Kanguru USB3.0 PCIe Card. The

Kanguru USB3.0 PCIe Card is a host adapter that will provide your

desktop with two USB3.0 ports. Once installed you will have access to

blazing fast USB3.0 SuperSpeed with transfer rates up to 5Gbps, 10x

faster than USB2.0.

Features

• USB3.0 SuperSpeed (5Gbps)

• Backwards compatible with:

○ USB1.1 FullSpeed (12Mbps)

○ USB2.0 HighSpeed (480Mbps)

• Supports two downstream ports

• Compliant with PCI Express Base Specification 2.0

• Compliant with USB 3.0 specification Revision 1.0

• Single-lane (x1) PCI Express throughput rates up to 5Gbps

• Built in 4-pin power connector for receiving extra power

• Hot-swap compatible

System Requirements

• Pentium 4, 2.0GHz computer with 1GB RAM or above

• Available PCIe slot (recommended PCI Express 2.0)

• Compatible OS

○ Windows XP

○ Windows Vista

○ Windows 7

○ 32 and 64 bit compatible

Package Contents

• Kanguru USB3.0 PCIe Card

• Driver CD

• Quick Start Guide

3. Driver Installation

In order for Windows to communicate with the Kanguru USB3.0 PCIe

Card you will need to install the necessary device drivers.

1. Insert the Driver CD that came included into your computer.

2. Open the CD-ROM drive through Windows Explorer.

3. Open the folder labeled ‘PCIe’.

4. Double click on the ‘Setup.exe’ le. This will launch the install

wizard.

5. Follow the directions on the install wizard to install the necessary

device drivers.

When the install wizard has nished, click on the Finish button and restart

your system to complete the install.

4. Technical Support

If you experience any problems using your Kanguru USB3.0 PCIe Card

or have any technical questions regarding any of our products, please call

our tech support department.

Our tech support is available Monday thru Friday, 9am to 5pm EST.

Phone: 1-508-376-4245

Website: www.Kanguru.com

Support: support.kanguru.com

2. Hardware Installation

1. Power off your computer.

2. Unplug the power cord and remove your computer’s cover. Make sure to

ground yourself by touching your computer’s metal frame.

3. Remove the slot cover from an available PCIe slot.

4. Carefully align the card’s bus connector with the PCIe slot on the

motherboard and then push the card into the slot rmly.

5. Connect a molex power cable from your computer’s internal power supply

to the 4-pin power connector on the PCIe card.

6. Secure the card to the slot bracket with a screw.

7. Replace the computer’s cover and reconnect the power cord.

Note: If you are having trouble installing your PCIe card, please visit the

Kanguru Support Site’s knowledge base for detailed instructions.

http://support.kanguru.com/index.php?action=kb&article=88

Summary of Contents

Page 1

Comments to this Manuals

No comments

Kanguru USB3.0 PCIe Host Controller User Manual

Browse online or download User Manual for Storage Kanguru USB3.0 PCIe Host Controller. Kanguru USB3.0 PCIe Host Controller User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Storage Kanguru USB3.0 PCIe Host Controller